FKM(fluoroelastomer)

FKM (Fluoroelastomer)FKM is copolymer of vinylidene fluoride and hexafluoropropene. The content of fluorine is 66% byweight. It can be molded, extruded or injected into rubber products, such as O-rings, gaskets, seals and diaphragms as well as hoses etc.Items262022630226404  2650426704269022612026140Mooney viscosity (ML(1+10)1210C)20-2930-3940-4950-5965-8590-99110-129130-149AppearanceWhite or light-yellow flakeFluorine content(%)66Density(g/cm3) 23 0C1.82+0.02Tensile strength after press cure (MPa) 1770C,10min=8899991010Tensile   strength after  post   cure(Mpa) 2300C,24H=1010111112121313Elong
FKM(fluoroelastomer)